// Usare l'integrato FT2232H - Versione 0.2 - Dicembre 2009
// Copyright (c) 2009, VincenzoV.net
// Creative Commons | Attribuzione-Condividi allo stesso modo 3.0 Unported.
// Creative Commons | Attribution-Share Alike 3.0 Unported
// https://www.vincenzov.net/tutorial/elettronica-di-base/FT2232H/index.htm

#include <stdio.h>
#include "../ftd2xx.h" // Change according your system setting

int main()
{FT_HANDLE ftHandle;
 UCHAR Mask = 0xff;  // All pins ad output
 UCHAR Mode = 0x01;  // Setting mode: Asynchronous Bit Bang
 DWORD BytesWritten;
 UCHAR TxBuffer[1];
 FT_STATUS ftStatus; // Error code (=FT_OK if no error)

 ftStatus = FT_Open(0, &ftHandle); // Open FT2232H and assign to "handle"
 if(ftStatus != FT_OK)             // Error?
  {printf("Error code: %d \n", ftStatus);
   return(1);
  } 

 ftStatus = FT_SetBitMode(ftHandle, Mask, Mode); // Setup mode
 if(ftStatus != FT_OK) 
  {printf("FT_SetBitMode failed! Code: %d\n", ftStatus);
   return(2);
  } 

 for (;;)           // Infinite loop
 {TxBuffer[0]=0x40; //0100 0000 - LED1 ON (connected to ADBUS6)
  ftStatus = FT_Write(ftHandle, TxBuffer, 1, &BytesWritten);
  if(ftStatus != FT_OK) 
   {printf("FT_Write failed! Code: %d\n", ftStatus);
    return(3);
    } 
  sleep(1); 

  TxBuffer[0]=0x20; //0010 0000 - LED2 ON (connected to ADBUS5) - LED1 OFF
  ftStatus = FT_Write(ftHandle, TxBuffer, 1, &BytesWritten);
  if(ftStatus != FT_OK) 
   {printf("FT_Write failed! Code: %d\n", ftStatus);
    return(3);
   } 
  sleep(1);
 }
}